Owner`s manual

Document # 103357-0004R

October, 2008

ULTRA SYSTEM

OWNER

’

s Manua

1.4.7 Advanced configuration – using a PS2 Keyboard and Spill Proof printer

For advanced configurations, a PS2 keyboard can be connected to the Ultra Board. DIP switch

7 of bank 3 must be set to ON and DIP switch 8 of bank 3 must be set to OFF. The Ultra Board

must be powered up while holding the red button (function 1) for the keyboard to be detected.

Do not release the red button until “P5” is visible on the two digit display. Once the start up

routine is complete, the printer will print the power on information. Press F4 to enter the set up

menu and follow the instructions that will be printed by the Spill Proof printer. See Appendix A

for further information.

Note:

The keyboard’s F1, F2 and F3 correspond to the 3 function buttons on the Ultra board

(Red, White and Black)

Note:

Modem must be disconnected

Figure 11: Configurations using Keyboard & Printer

Functions Keys

F1 (or RED button) Print Status Report

F2 (or WHITE button) Print Bookkeeping

F3 (or BLACK button) Force Hyper Terminal Communication

F4 Enter Setup

F5 Print Last Cashout

F6 Future

F7 Future

F8 Enable/Disable printer

F9 Enable/Disable multi-Game

F10 Master/Slave/Ghost Master/Ghost Slave

F11 Scroll slave address

F12 Clear bookkeeping