Owner`s manual

`
Document # 103357-0004R
October, 2008
18
ULTRA SYSTEM
OWNER
’
s Manua
l
4 Connections and Configuration
Figure 15: Installation overview
4.1 Setup for location with a maximum of 6 gaming terminals
1. Install the Spill Proof printer on the attendant counter. Connect the control box to Spill
Proof printer.
Note:
The printer’s Aux Port must be set to Site Controller 1
2. Using the included hardware, mount the Ultra Board inside the gaming terminal which is
closest to the attendant counter.
Note:
If the gaming floor layout is to be rearranged from time to time, a protective
enclosure (Nanoptix part #:750027-0000R) is available in order to mount the Ultra Board
outside of the gaming terminals.
Note:
In order for the Ultra board to communicate with the Spill Proof, DIP switch 7 of
bank 3 has to be set to ON and DIP switch 8 of bank 3 has to be set to OFF.