User`s manual
Table Of Contents
- FRONT MATTER
- PRODUCT UPDATE NOTICE
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- GLOSSARY
- INDEX
- QUICK REFERENCE
When you press the FONT button, the printer scrolls through eight of
the ten built-in fonts. The indicator lights show the selected font.
m
indicates the light is off.
m
indicates the light is on.
\ I
/
m
indicates the light is blinking.
You use the software command ESC k to select the other two built-in
fonts:
ESCk6
OCR-A
ESCk8
Epson Orator-S
When you select one of these two fonts, the indicator lights show the
OTHER pattern. The software commands are described in Chapter 9
of your User’s Manual.
The SelecType feature is described in Chapter 3 of your User’s
Manual. Chapter 3 shows samples of the draft, Epson Roman, and
Epson Sans Serif fonts. The Multi-Font Module section of Chapter 5
shows samples of the Epson Courier, Epson Prestige, Epson Script,
OCR-B, OCR-A, Epson Orator, and Epson Orator-S fonts. These
fonts are now built-in and do not require the Multi-Font Module.
Therefore, ignore any references to the Multi-Font Module.
Product Update Notice
3