Operation Manual

Using P-2000 With Other Devices 57
7
7
7
7
7
7
7
7
7
7
English
2. Connect the USB cable to your computer. Then
remove the USB connector rubber cover and
connect the other end of the USB cable to P-2000.
The PC peripheral mode icon ( ) is displayed
for a short time, then the LCD turns off.
Note:
The LCD turns on when any button is pressed.
3. Start EPSON Photo!4, which you have installed
on your computer from the CD-ROM. You can
display or copy data with EPSON Photo!4. See the
online EPSON Photo!4 User’s Guide for
instructions.
Note:
❏ You cannot move data in the memory card to your
computer.
❏ When you see HDD of P-2000 in your computer,
the “Albums” folder corresponds to Albums and
the “Cards” folder corresponds to Saved Data.
❏ Do not change the name of the album folder
(“Albums”), card folder (“Cards”) and the folders
under these two folders.
❏ When you copy data from your computer using
the Explorer or Finder to P-2000, copy data to
\Albums\PC_DATA. This folder exists as a
default.
❏ Remove the USB cable when you operate P-2000
if it is not connected to a computer or printer.