Operation Manual

60 Customizing Settings
Chapter 8
Customizing Settings
This section describes how to customize P-2000
settings. You can customize various settings for
displaying and copying images, or turn on the sound
setting to make your P-2000 more fun to use.
Changing the P-2000 Settings
The settings described in the following sections can be
changed from the Settings menu. To display the
Settings menu, select Settings in the Home screen and
press the OK button.
The following table shows details of each setting.
NTSC
PAL
Settings
Hard DriveLanguage
Date and timeVideo Out
DisplayPower Save
Copy Mode
Vol um eLCD Brightness
Slide Show
LCD Brightness
setting
LCD
Brightness
Change the brightness of the LCD.
Select an appropriate brightness
by using the Right or Left button.
Volume settings Operation
Sound
When this setting is set to ON, a
beep sounds when you do some
operations.
Volume You can set the volume for playing
audio and video.
Slide Show
settings
Effect Select one of the five slide show
effects. The slide show is executed
with the selected effect.
BGM Select the BGM which is played
during the slide show. You can
select None, one of the five default
audio, or audio data in the same
folder.
Duration Set the duration to switch the
images during a slide show. You
can set the duration by moving the
slidebar from 3 seconds to 30
minutes.