Operation Manual

68 Maintenance and Troubleshooting
Power supply problems
Viewing and playing problems
The power does not turn on.
Cause What to do
The battery has run out. When the icon is displayed
on the top right corner of the
LCD, the battery has run out. See
“Charging the battery” on page
17 and charge the battery.
The battery is set
incorrectly.
Make sure that the battery is
installed correctly. See
“Installing the battery” on page
17.
The data is not displayed.
Cause What to do
The image format is not
supported.
See “Available types of image
data” on page 29 and make sure
the image format is supported.
The data is not displayed.
Cause What to do
The video or audio data
you selected is not
supported.
See “Available types of
video/audio data” on page 35
and make sure the data is
supported.
The data is broken. Copy the data again.
The LCD Brightness
setting is too dark.
See “Changing the P-2000
Settings” on page 60 and make
sure the LCD Brightness setting
is set properly.
The video cable is
connected to P-2000.
Disconnect the VIDEO cable to
display the LCD.
The movie is not displayed clearly or stops abruptly.
Cause What to do
The bit rate of the data is
too high.
Check the bit rate. See
“Available types of video/audio
data” on page 35 for details.