User`s guide

Basic Scanning
Page 16
Basic Steps to Scanning
Perform the following steps to scan an image from
your EPSON scanner into a host application.
1. Access the EPSON Perfection 600 main window.
2. Place the original to be scanned on the scanner
document table.
3. Select the appropriate Scan Type
and Scanning
Filters for the original you are scanning.
4. Preview the image by clicking the Prescan button.
The prescan function displays the image as it will be
scanned. The remainder of this guide covers how to
make adjustments to an image before scanning, but
for now, continue to the next step.
5. Select the portion of the image to be scanned.
If you are going to scan only a part of the original,
use the frame to crop (define) the part of the image
Note:
When you access the
main window, the last
frame scanned displays.
Click the Prescan button
to clear the old ima
g
e and
preview a new one.
Croppin
g
an ima
g
e
makes the ima
g
e take up
less stora
g
e space on
your hard drive.
TWAIN.bk : basic.fm5 Page 16 Monday, September 8, 1997 2:06 PM