User`s guide

Loading and Cutting Roll

Paper

Loading Roll Paper

Using the roll paper holder, position the paper at the

rear of the printer. See the following for information on

supported roll paper types.

U “Supported Media” on page 107

Turn on the printer.

Open the front cover.

Tip:

If the front manual feed tray is open, push the

center of the tray to close it.

Fully extend the output tray.

After confirming that the end of the roll paper is

cut straight across, insert the supplied roll paper

holder into the ends of the roll.

If the end of the roll paper is not cut straight

across, trim it straight before proceeding.

Open the rear support.

Only open the support; there is no need to extend

it.

Epson Stylus Photo R3000 User's Guide

Basic Operations