User`s guide

Note:

Epson recommends the use of genuine Epson ink

cartridges. Epson cannot guarantee the quality or

reliability of non-genuine ink. The use of non-genuine

ink may cause damage that is not covered by Epson’s

warranties, and under certain circumstances may cause

erratic printer behavior.

Information about non-genuine ink levels may not be

displayed, and use of non-genuine ink is recorded for

possible use in service support.

Make sure the printer is on.

Open the printer cover.

Open the cartridge cover.

Remove the ink cartridge that will be replaced.

Hold the cartridge by the hooks and lift it straight

up.

If the cartridge does not come out easily, pull

harder.

Note:

Removed ink cartridges may have ink around the

ink supply port, so be careful not to get any ink on

the surrounding area when removing the

cartridges.

Holding the new cartridge as shown, shake it four

or five times and then remove it from the package

and peel off the yellow film.

You may hear a rattling sound from inside the

cartridge when it is shaken.

Note:

Do not touch the green IC chip on the ink cartridges.

You may not be able to print properly.

Epson Stylus Photo R3000 User's Guide

Maintenance