User's Manual

Playing Back Photos
6-13
2
Press the button under
SLIDE SHOW
. You see the
following:
3
Press the button next to
3 Sec
to select the slide show
speed. You can have the image change automatically
every 3 or 5 seconds. (When sound is turned on, the
camera displays an image until its entire recording has
played.)
If you select
Manual
, you can move through your
images manually, by pressing the
Fwd
and
Rev
buttons.
If you select
Shuffle
, your images play in random order
and display for 3 seconds.
NOTE
You can also turn sound on or off, rotate the images, or
exclude specified images from your slide show. See the
following sections for instructions.
4
Press the button next to
Start
to begin the slide show.
To pause the slide show, press the button under
Pause
.
Press the same button (under
Restart
) to restart it.
While the slide show is paused, you can move backward
through the slides by pressing the button under
Rev
.
You can move forward by pressing the button next to
Fwd
. You can also exclude an image from the slide show
by pressing the button next to
Exclude
.
To stop the slide show, press the button under
Quit
.
NOTE
At the end of the slide show, a black screen with the message
“fin!” appears. Then the camera shuts off. Press any button on
the back of the camera to turn it back on in playback mode.
Capella.book Page 13 Thursday, April 20, 2000 4:21 PM