Operation Manual

Optional Accessories B-5
Attaching an Optional Flash
You can attach an optional flash unit to the camera to
significantly increase the brightness of your images in dark
environments. It also works well for portrait photography.
EPSON recommends the following external flash (available
through photo specialty shops, mail order catalogs, and on
the Internet):
Brand: Metz
Model: 32Z-2
NOTE
The camera must be in the Manual user mode to enable the
external flash. See page 1-10 to change your user mode to
Manual.
To attach the flash and set up your camera to use it:
1
Make sure the camera and flash are both turned off.
2
If necessary, insert batteries into the flash unit as
described in the manufacturer’s instructions.
3
Slide the flash onto the top of the camera’s hot shoe as
shown below. (See the manual for the flash if you need
more detailed instructions.)
4
Turn on the camera and
turn your camera dial to
. You see the SETUP
menu.
