Operation Manual

Setting Up Your Camera 1-12
Installing a CompactFlash Memory
Card
You can purchase additional Type I CompactFlash memory
cards from leading suppliers like Lexar Media, Delkin
Devices, and SanDisk. See page B-2 for more information.
To install a memory card:
1
Make sure the camera is turned off. (Press the
POWER
button to turn off the camera, if it is on.)
CAUTION
Never remove a card while the camera is on. Data in the card
may be lost or damaged.
2
Place your finger
behind the memory
card cover latch and
pull the cover open.
3
Make sure the front of the card
is facing the same direction as
the front of the camera, and
the arrow on the card’s label is
pointing in.
4
Insert the card all the way into
the memory card slot. As you
insert the card, the eject button
pops up.
CAUTION
Don’t force the card into the slot. If the card doesn’t slide in
all the way, turn the card over and reinsert it.
5
Close the memory card cover.
memory card
cover latch
