Operation Manual

Adjusting Camera Settings 7-2
You see the camera’s date
and time settings in the
upper right corner of the
screen.
2
Press the button next to the
time and date to display the
following screen. The first
item is highlighted in red.
3
Press the buttons next to the
up and down arrows to adjust the setting, then press the
button under the right arrow to highlight the next item.
4
Repeat step 3 for each item you want to change. (To go
back to a previous item, press the button under the left
arrow.)
5
Press the button next to the date display format
to change it to
M.D.Y.
(12/31/2001),
D.M.Y.
(31/12/2001),
Y.M.D.
(2001/12/31).
6
When you’re done, press the button under
BACK
to
save the settings and return to the SETUP menu.
Setting the Auto Power Off Time
The automatic power off feature saves battery power by
automatically putting the camera into sleep mode when it’s
idle for a designated period of time. You can set the camera
to turn off after 30 seconds, one minute, or five minutes.
To change the power off interval:
1
Turn the dial to and press the
POWER
button to
display the SETUP menu.
2
Press the button below
Camera SETUP
to go to
the Camera SETUP menu.
The current power off
interval appears in the upper
right corner of the screen.
