Operation Manual

Selecting Images for Printing 8-4
3
Press the button under
ADJUST
. You see the
following menu.
4
Press the buttons next to
Brightness and Sharpness to
change their settings to
Std.
(standard),
High
, or
Low
.
5
Press the button next to the up arrow to increase the
number of copies, or press the button next to the down
arrow to decrease the number of copies.
6
Press the button under
BACK
to return to the main
PRINT IMAGE menu. You see a yellow icon next to
the number of copies in the corner of the image. (The
icon does not appear if both settings are
Std.)
Enabling an Index Print
1
Set the camera dial to and press the
POWER
button.
2
You see the PRINT IMAGE
menu.
3
Press the button next to the
index setting to change it to
Index On
. Press the button
again to turn the index print
off.
