User's Manual

Connecting to Your Computer 3-3
A
B
4 Line up the arrow on the cable connector with the
notch on the camera’s serial port. Then insert the
connector.
5 Turn on the camera and your computer system. A line
appears at the bottom of the picture counter on the
camera’s control panel.
NOTE
When the camera is connected to your computer, you can’t use any
of the control buttons or the shutter button on the camera. You can
only operate these features through the computer.
The auto shut-off feature remains in effect when the
camera is connected to your computer, but shut-off takes
place after 5 minutes of inactivity instead of 60 seconds. To
turn the camera back on, slide the power switch OFF and
ON again, or use EPSON Photo! to turn on the camera by
clicking the Controls tab, Setup tab, or Start tab. You can
adjust the auto shut-off time by following the instructions
on page 3-6.
notch
arrow
serial port
line
pc-3.fm5 Page 3 Friday, November 1, 1996 10:51 AM