User's Manual

Getting Started
1-11
A
B
1
Installing for Windows 3.1
x
or
Windows NT 3.51
Follow these steps:
1
Insert the CD-ROM in your drive.
2
In the Program Manager, select
Run
from the File
menu.
3
Type
D:\SETUP
. If your CD-ROM drive is not
drive D, substitute the correct letter.
4
Click
OK
and follow the instructions on the screen.
Installing on a Macintosh
Follow these steps:
1
Insert the CD-ROM in your drive.
2
Double-click the CD-ROM icon.
3
Double-click the
Install Image Expert
icon. Click
Continue
and follow the instructions on the screen.
Making Software Installation Diskettes
You can create Image Expert installation diskettes from the
CD-ROM, following the instructions below. If you need the
EPSON Photo!2 software and utilities on diskette, you can
download the files from the EPSON website at
www.epson.com
.
Making Windows Diskettes
Before you start, make sure you have 6 blank, formatted
diskettes for Windows 3.1 or 9 for Windows 95 and
Windows NT. Then follow these steps:
1
Use the Windows Explorer (or File Manager) to access
your CD-ROM drive. (You may have to exit the Setup
program first.)
2
Double-click
Mkfloppy
.
3
Depending on which version of Windows you’re using,
select
Windows 95/Windows NT
or
Windows 3.1
.
Then select your diskette drive and click
OK
. Follow the
instructions on the screen to create the installation
diskettes.
Popch1.fm5 Page 11 Tuesday, August 26, 1997 4:46 PM