User's Manual

8-2
Using Custom and Advanced Features
NOTE
If you have the optional AC adapter, you can save on batteries by
using it when you connect the camera to your computer. The AC
adapter should be available where you bought your PhotoPC 600,
or you can order it from EPSON. See page A-1 for more
information.
Follow these steps to take pictures from your computer:
1
Connect the camera to your computer as described in
Chapter 4.
2
Position the camera facing the subject. Using a tripod
will give you the most control when setting up your
shots. See page A-3 for instructions.
3
Turn on both your camera and your computer system.
4
Start Image Expert an described on page 4-4.
5
Click the
Camera Controls
button or choose
Controls
from the Camera menu.
You see a dialog box like the following:
NOTE
The camera’s auto shut-off feature remains in effect when
the camera is connected to your computer, but it takes place
after 5 minutes of inactivity. To turn the camera back on,
close the lens cover and then open it again.
Click to erase
images in the
camera.
Click to
capture
the image
you see.
Popch8.fm5 Page 2 Tuesday, August 26, 1997 5:17 PM