User's Manual

4-20

Using the LCD Menus to Change Settings

Do one of the following:

If user mode is set to Program, the current white balance

setting appears above the

W.B. button. Press the W.B.

button to select

FIX.

If user mode is set to Manual, hold down the

button (under

PRESS or HOLD) until you see the

following screen. Press the

W.B. button to select FIX,

then press the

MENU button (under Back) to save your

setting.

white balance setting

Altair.book Page 20 Thursday, July 1, 1999 3:33 PM