User's Manual

4-28
Using the LCD Menus to Change Settings
Setting the LCD Brightness
To adjust the brightness of the LCD screen, follow these
steps:
1
Turn the camera dial to to display the SETUP menu.
Then press the
MENU button (under Camera
SETUP
). You see the Camera SETUP menu.
2
Press the + or − button (next to the up and down
arrows) to adjust the screen brightness.
Setting the Alert Beep
Normally, the camera’s alert beep lets you know when an
image has been captured. However, you can turn the alert
beep off, or set the camera to beep whenever you press any of
its buttons.
To set the alert beep, follow these steps:
1
Turn the camera dial to to display the SETUP menu.
Then press the
MENU button (below Camera
SETUP
). You see the Camera SETUP menu.
Altair.book Page 28 Thursday, July 1, 1999 3:33 PM