User Setup Information

11
4
Use the camera’s control buttons to change image
quality, flash, or other basic settings. (See page 4 for
a description of basic camera settings.)
5 Turn the optical zoom control to the left (counter-
clockwise) to zoom in on your subject, or to the
right (clockwise) to zoom out.
6 Hold the shutter button halfway
down to lock the auto focus and
exposure.
7
Press the shutter button the rest of
the way down to take the picture.
8 Hold the camera still until it clicks, then release the
shutter button. When the photo capture light stops
flashing, your image is saved.
CAUTION
If you set the camera down while the light is still flashing, do it
carefully. The camera may lose your image if you set it down
too hard.
zoom control
shutter button
quickrefset.book Page 11 Thursday, September 9, 1999 10:27 AM