User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
103
4. Select Network printer, then click Next.
5. On the next screen, click Next.
6. Double-click the icon of the computer that is directly connected to PictureMate.
Then, click the icon for PictureMate.
7. Click
Next and follow the on-screen instructions.
Note: Depending on the operating system and the configuration of the computer
to which PictureMate is connected, the Add Printer Wizard may prompt you to
install the printer driver from the PictureMate software CD. In this case, click the
Have Disk button and follow the on-screen instructions.
Windows Me and 98
First, you need to set up PictureMate as a shared printer on the computer that it is
directly connected to. Then, you must install the PictureMate software on each
computer that will access it through the network.
Setting Up a Shared Printer
Follow these steps to configure your computer for printer sharing and to share
PictureMate with other computers on a network.
1. Click Start > Settings > Control Panel.
2. Double-click the Network icon.
3. Click the File and Print Sharing button.
4. Select the I want to be able to allow others to print to my printer(s) check
box and click OK.
5. In the Network dialog box, click OK.