User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
107
Setting Up a Shared Printer
To share PictureMate with other computers on an AppleTalk network, follow these
steps to configure the computer that it is directly connected to.
1. Turn on PictureMate.
2. Select
Chooser from the Apple menu and click the icon for PictureMate. Then,
select the port that the printer is connected to.
3. Click the
Setup button. The Printer Sharing Setup dialog box opens.
4. Click the Share this Printer checkbox, then type the printer name and password
information as necessary.
5. Click OK. The name of the shared printer appears in the port list in the Chooser.
6. Close the Chooser.
Accessing a Networked Printer
Follow these steps to access PictureMate from other computers on the network:
1. Turn on PictureMate.
2. Install the printer software from the PictureMate CD-ROM.
3. Select Chooser from the Apple menu. Then, click the icon for PictureMate and
select the shared printer from the Select a printer port list.
Note: Only printers that are connected to your current AppleTalk zone are
available.
4. If a password dialog box appears, enter the password for the printer and click OK.