User manual

112
■ Place the printer on a flat, stable surface that extends beyond the base of the
printer in all directions. The printer will not operate properly if it is tilted at an
angle. If you place the printer by the wall, leave more than 4 inches (10 cm)
between the back of the printer and the wall.
■ When storing or transporting the printer, do not tilt it, stand it on its side, or turn
it upside down. Otherwise, ink may leak from the cartridge.
■ Leave enough space in front of the printer for the paper to be fully ejected.
■ Avoid places subject to rapid changes in temperature and humidity. Also, keep the
printer and the AC adapter away from direct sunlight, strong light, water, or heat
sources.
■ Do not leave the printer in places subject to high temperature, such as your car.
Otherwise the printer may be damaged or ink may leak.
■ Avoid places subject to dust, shock, or vibration.
■ Leave enough room around the printer to allow for sufficient ventilation.
Photo Cartridge Safety Instructions
■ Keep photo cartridges out of the reach of children and do not drink the ink.
■ Do not shake the photo cartridge after removing it from the bag; this can cause
leakage.
■ Be careful when you handle used photo cartridges, as there may be some ink
remaining around the ink supply ports. If ink gets onto your skin, wash the area
thoroughly with soap and water. If ink gets into your eyes, flush them
immediately with water. If discomfort or vision problems continue after a
thorough flushing, see a doctor immediately.
■ Do not remove or tear the label on the cartridge; this can cause leakage.
■ Do not dismantle photo cartridges or try to refill them. This could damage the
print head.