User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
28
You can go back and change settings at any time by opening PhotoStarter:
■ In Windows, click Start, point to Programs (or All Programs), Film Factory,
and click
EPSON PhotoStarter3.0. Open the Settings menu and choose
Change Settings.
■ On a Macintosh, open the EPSON PhotoStarter folder, then double-click
EPSON PhotoStarter. Open the Tools menu and choose Change Settings.
Configuring CardMonitor
Follow these steps to configure Epson CardMonitor in the Macintosh OS X Image
Capture utility:
1. Open the Applications folder and double-click Image Capture.
2. Open the Image Capture menu and select Preferences.
3. From the Camera Preferences list, select Other. A new Applications folder opens.
4. Open the Epson CardMonitor folder, select Epson CardMonitor, and click the
Open button.
5. Close the Image Capture utility. CardMonitor will now open automatically when
you insert a memory card. Follow the on-screen instructions.
Preparing to Remove a Memory Card
Once you’re finished copying photos from your memory card, follow the steps below
to remove it. Be sure to remove any cards before unplugging the USB cable from
PictureMate.
Caution: Do not eject a card while the card light is flashing, or without performing
the steps described below, or you may lose data on the card. Be sure your
memory card has been removed before unplugging the USB cable.
1. Depending on your operating system, you may need to do one of the following:
■ If you’re using Windows XP or 2000, click the Unplug or Eject
Hardware
icon on the taskbar.
In Windows XP, click Safely Remove USB Mass Storage Device.
In Windows 2000, click
Stop USB Mass Storage Device.