User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
71
You can also buy the Print Pack from the Epson Store at (800) 873-7766 or visit
www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for
dealer referral.
Note: Use your photo cartridge within six months of installing it and before the
expiration date on the package.
Visit www.MyPictureMate.com for information about PictureMate, special offers,
and accessories.
Removing the Used Photo Cartridge
Make sure you have a new PictureMate photo cartridge before you begin. Once you
start replacing a cartridge, you must complete all the steps in one session.
Tip: If you see the Replace cartridge message while printing, you can still
replace the photo cartridge and continue the current print job. Just replace it
without turning off and unplugging PictureMate.
Caution: Do not refill the photo cartridge. This could result in damage to
PictureMate from ink spills.
1. If PictureMate is on, press the On button to turn it off.
2. Wait until the LCD screen goes blank, then disconnect the power cable and USB
cable (if connected).