User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
75
4. Move the lever right to the Lock position. If it does not lock in place, the
cartridge is crooked; you need to push in whichever side is sticking out too far.
(See step 3.
)
Caution: If the cartridge is not inserted correctly, ink may leak out.
5. Close the cartridge door. Make sure it is completely closed.
6. Move the handle over to the back.
7. Reconnect the power cord. If you’re using a computer or external drive, reconnect
the USB cable to PictureMate.
8. Turn PictureMate back on.