User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
77
5. Disconnect the power cord and any connected USB cable from the back of
PictureMate.
6. Pack both the PictureMate and its power cable in the box that PictureMate came
in, or in the optional Carrying Case.
Caution: Make sure the photo cartridge is installed before transporting. Don’t
place PictureMate on its side or upside down, or ink may leak.
Note: If your prints don’t look as good after PictureMate
has been moved, try
aligning the print head. See Aligning the Print Head Directly From PictureMate
.
Tip: You can order an optional PictureMate Carrying Case (part# ARC1B) from the
Epson Store at (800) 873-7766 or visit www.epsonstore.com (U.S. sales only). In
Canada, please call (800) 463-7766 for dealer referral.
Cleaning PictureMate
To keep PictureMate working at its best, you should clean it several times a year.
Follow these steps:
1. Turn off PictureMate, unplug the power cord, and disconnect any USB cables or
drives.
2. Remove all paper, then use a soft brush to clean any dust or dirt from the paper
feeder.
3. Clean the PictureMate exterior with a soft, damp cloth.
4. Use a soft, dry cloth to clean the PictureMate screen. Do not use liquid or
chemical cleaners on it.