User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
80
If you see any gaps (as shown below), you need to clean the print head again.
7. If there are gaps, press OK to clean the print head again. If there are no gaps, press
Cancel to go back to the PictureMate Main Menu.
If you don’t see any improvement after cleaning three or four times, refer to
Solving Problems.
You can also turn PictureMate off and wait overnight—this allows any dried ink
to soften—and then try cleaning the print head again.
Aligning the Print Head Directly From PictureMate
If you have moved PictureMate and the print quality is not the same as it was
before—for example, if you see misaligned vertical lines or dark or light horizontal
banding—you may need to align the print head.
1. Make sure a sheet of photo paper is loaded (see Loading Paper).
2. On the Main Menu, press or to highlight More Options, then press OK.
3. Press or to highlight Maintenance, then press OK.
4. Press or to highlight
Align Print Head, then press OK.