User manual
Table Of Contents
- Contents
- PictureMate User’s Guide
- Getting to Know Your PictureMate
- Loading Paper
- Printing From Your Computer
- Printing Photos Using Film Factory
- Copying Photos to Your Computer
- Saving Your Photos to an External CD-R/RW, Zip, or Flash Memory Drive
- Storing and Displaying Your Printed Photos
- Printing Without a Computer
- Compatible Memory Cards
- Photo Image File Requirements
- Inserting Your Memory Card
- Printing a Proof Sheet from the PictureMate Print Wizard
- Printing All Your Photos From the PictureMate Print Wizard
- Printing Some of Your Photos From the PictureMate Print Wizard
- Viewing the PictureMate Main Menu
- Selecting the Photos You Want to Print
- Setting the Number of Copies in the Main Menu
- Choosing a Layout
- Confirming and Printing
- Doing More With Your Prints
- Adjusting Printer Settings
- Printing From a PictBridge-enabled Digital Camera
- Printing From an External CD, Zip Disk, or Flash Memory Drive
- Printing Wirelessly From a Bluetooth Device
- Replacing the Photo Cartridge
- Taking PictureMate With You
- Cleaning PictureMate
- Improving Print Quality
- Solving Problems
- Where To Get Help
- Uninstalling PictureMate Software
- Setting Up Network Printing
- System Requirements
- Important Safety Instructions
- Specifications
- Notices
89
Running a Printer Check
You may need to run a printer check to see if a problem comes from PictureMate
itself or some other source.
1. If PictureMate is connected to your computer or other USB device, make sure
they are both turned off. Then disconnect the USB cable from PictureMate.
2. On the Main Menu, press or to highlight More Options, then press OK.
3. Press or to highlight Maintenance, then press OK.
4. Press or to highlight
Nozzle Check, then press OK.
5. When you see this message, press the Print button.
Press the On button to turn PictureMate off. Wait a
few seconds, then turn it on again. If the error does not
clear, see Where To Get Help
.
Message What to Do