Start Here Guide

ManualsBrandsEpson ManualsPhoto PrintersPictureMate Charm Compact Photo Printer - PM 225

2 Plug In and Turn On

1 Connect the power adapter to the back of

PictureMate.

2 Connect the power

cable to the power

adapter.

3 Plug the other end

of the power cable

into a power outlet.

4 Flip the handle to the back.

5 Open the paper support.

6 Press the On button to turn on PictureMate.

After a moment, you see a message on the photo

viewer screen.

Now you can install your initial photo cartridge.

2 Slide the cartridge lever left to the Release position.

3 Remove the initial photo cartridge

from its package.

Caution: Do not install a

different PictureMate

cartridge for initial setup.

Install only the initial photo cartridge

that came with your PictureMate.

4 Slide the cartridge straight into the slot, label side up,

until it clicks into place. It will not go in all the way.

5 Slide the lever all the way right, to the Lock position.

6 Close the cartridge door.

PictureMate charges the print head for

3 to 4 minutes and displays the screen above.

7 When you see the Charging complete message on

the photo viewer screen, press OK.

Turn over

Start Here

Follow these steps to set up your PictureMate

Charm and print–no computer required!

Note: To print from your computer, see the Basics book and your CD

after completing these steps.

1 Unpack

PictureMate

comes with all these items in the box.

1 Remove all the tape and packing material from the

outside of PictureMate.

2 Open the cartridge door

on the back of

PictureMate.

3 Remove the packing

material from inside the

cartridge slot.

4 Close the cartridge door.

PictureMate

Initial PictureMate

photo cartridge

PictureMate

photo paper

Basics book Printer Software CD

Power adapter Power cable

button

3 Install the Initial

Photo Cartridge

1 Turn PictureMate around and open the cartridge door.

*412504800*

Summary of content (6 pages)

PAGE 1
Start Here 2 Plug In and Turn On 2 Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package. 1 Follow these steps to set up your PictureMate Charm and print –no computer required! 2 3 Connect the power adapter to the back of PictureMate. Connect the power cable to the power adapter. Plug the other end of the power cable into a power outlet. different PictureMate cartridge for initial setup.
PAGE 2
Start Here 2 Plug In and Turn On 2 Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package. 1 Follow these steps to set up your PictureMate Charm and print –no computer required! 2 3 Connect the power adapter to the back of PictureMate. Connect the power cable to the power adapter. Plug the other end of the power cable into a power outlet. different PictureMate cartridge for initial setup.
PAGE 3
Start Here 2 Plug In and Turn On 2 Slide the cartridge lever left to the Release position. 3 Remove the initial photo cartridge from its package. 1 Follow these steps to set up your PictureMate Charm and print –no computer required! 2 3 Connect the power adapter to the back of PictureMate. Connect the power cable to the power adapter. Plug the other end of the power cable into a power outlet. different PictureMate cartridge for initial setup.
PAGE 4
5 4 Load Paper PictureMate comes with genuine Epson® glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage 1 PictureMate. 1 2 Move the handle to the back and open the paper support, if necessary. Insert a Memory Card Remove the memory card containing photos from your digital camera. Insert your memory card into the correct slot on PictureMate.
PAGE 5
4 Load Paper PictureMate comes with genuine Epson® glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage 1 PictureMate. 1 2 Move the handle to the back and open the paper support, if necessary. Insert a Memory Card Remove the memory card containing photos from your digital camera. Insert your memory card into the correct slot on PictureMate.
PAGE 6
5 4 Load Paper PictureMate comes with genuine Epson® glossy photo paper made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage 1 PictureMate. 1 2 Move the handle to the back and open the paper support, if necessary. Insert a Memory Card Remove the memory card containing photos from your digital camera. Insert your memory card into the correct slot on PictureMate.