Operation Manual

47
English
Making settings
1. Connect the Bluetooth Photo Print Adapter to
your printer.
& See “Connecting and Disconnecting the
Bluetooth Photo Print Adapter” on page 45
c
Caution:
Be sure that the printer is not operating
before connecting this product. Otherwise,
the printer may malfunction.
2. Press Menu.
3. Press or to select Setup, then press to
open the menu.
4. Press or to select Bluetooth, then press .
5. Change the settings of each item. See “Outline of
settings” on page 46 for information about
Bluetooth settings.
The Bluetooth Passkey Setting (PIN Code Set)
If you select Pairing as the Connectivity Mode or On
as the BT Encryption setting, the Passkey must be
entered into a Bluetooth wireless-capable device
before it can communicate with and print from the
printer. The default Passkey is 0000.
To change the Passkey, follow the instructions below.
A Passkey of 1234 is used as an example.
BT Device
Address
Set at the
factory
(Example)
11-11-11-11-1
1-11
Displays the unique Bluetooth
Device Address of the printer.