- EPSON Equity 386/20 - User Manual

Follow these steps to set the amount of memory:
1. Press 1 to highlight the Memory option and press Enter. A
smaller box appears beneath the main Setup menu:
-
If the displayed settings are correct, press t to return to the main
menu.
2. To change the Main memory setting press Enter. The value
changes to 256 KB. Press Enter again to change it to 512 KB. If
you press Enter again, the value returns to 640 KB.
3. To change the Expansion memory setting, press J to highlight the
Expansion option. To increase the memory one megabyte at a
time, press + until the value matches the amount of memory in
your computer. To decrease it one megabyte at a time, press +.
For example, to increase the expansion memory to 3MB (added
to the 1MB of main memory), press + three times. The screen
displays the following:
-1 :
If you prefer, you can increase and decrease the memory in 64KB
--
increments using the + and - keys.
4. When you finish setting the amount of memory, highlight
** SAVE SETTINGS ** and press Enter to return to the main
menu.
2-4 Running the Setup Program