User`s guide

36 Control Panel
Functions auxiliary
This section describes functions executed by turning on the
printer while holding one or more buttons. These functions are
shown in the following table and explained in detail after the
table.
* To enter this mode, press the F1/Eject and F2 button while the F1/Eject,
Offline, and F2 lights are flashing.
** To enter this mode, press the F1/Eject button while the F1/Eject, Offline, and
F2 lights are flashing.
*** To enter this mode, press the Offline button while the F1/Eject, Offline, and
F2 lights are flashing.
**** To enter this mode, press the F2 button while the F1/Eject, Offline, and F2
lights are flashing.
Self-test
Prints the self-test. See “Printing a Self-Test” on page 55 for more
information.
Default setting
Starts the default setting mode. See “Changing default settings”
on page 53 for more information.
Switch Function
F2* Self-test
F1/Eject & F2 Default setting
F1/Eject & Offline Compress printing mode
Offline Data dump
Open the cover & F1/Eject Paper removing
F2** Bidirectional adjustment
F2*** Top-of-form adjustment
F2**** Printing start position adjustment