User's Guide

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network.

Wired Network Projection

Wireless Network Projection

Setting Up Projector Network E-Mail Alerts

Setting Up Monitoring Using SNMP

Wired Network Projection

You can send images to your projector through a wired network. To do this, you connect the projector to

your network, and then set up your projector and computer for network projection.

After connecting and setting up the projector as described here, install the network software from the

Epson Projector Software for Meeting & Presentation CD-ROM on your computer. Use the following

software and documentation to set up, control, and monitor network projection:

• EasyMP Network Projection software sets up your computer for network projection. See the Network

and PC Free Operation Guide installed from your projector CD-ROM for instructions.

• Easy Management

EasyMP Monitor software (Windows only) lets you monitor and control your

projector through the network. See the EasyMP Monitor Operation Guide installed from your projector

CD-ROM for instructions.

Connecting to a Wired Network

Selecting Wired Network Settings

Parent topic: Using the Projector on a Network

Connecting to a Wired Network

To connect the projector to a wired local area network (LAN), use a 100BaseTX or 10BaseT network

cable. To ensure proper data transmission, use a Category 5 shielded cable or better.

1. Connect one end of the network cable to your network router.