User's Guide

13. To prevent display of the IP address on the network standby screen, turn off IP Address Display.
After you complete the wireless settings for your projector, you need to select the wireless network on
your computer.
Parent topic: Wireless Network Projection
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your computer.
1. To access your wireless utility software, double-click the network icon on the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the SSID you assigned to the projector.
3. Click Connect.
Parent topic: Wireless Network Projection
Selecting Wireless Network Settings in Mac OS
Before connecting to the projector, select the correct wireless network on your Macintosh.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the SSID you assigned to the projector.
Parent topic: Wireless Network Projection
Setting Up Wireless Network Security
You can set up security for your projector to use on the wireless network (PowerLite 1915/1925W). Set
up one of the following security options to match the settings used on your network:
• WEP encryption
• WPA security
• EAP protocol
1. Press the Menu button and select the Network menu.
61