® ® Epson PowerLite Home Cinema 720 Home Theater Projector User’s Guide
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.
Contents Introduction 7 Projector Parts Projector Control Panel Remote Control Button Map Optional Accessories Registration and Warranty Using This Manual 8 9 10 11 11 12 Setting Up the Projector 13 Choosing a Location Installing the Projector Connecting the Cables Making Other Connections Installing Batteries in the Remote Control Turning On the Projector Turning Off the Projector Selecting the Image Source Positioning the Image 13 16 18 19 20 21 22 22 24 Making Basic Adjustments 25 Correcting th
Making Detailed Adjustments 33 Using the Menu System Changing How the Menus Display Adjusting the Picture Quality Input Brightness Settings Sharpness and Picture Quality Settings Color Settings Adjustments for Computer Images Selecting Memory Settings and Resetting the Projector Selecting Memory Settings Creating Memory Settings Deleting Saved Memory Settings Resetting the Projector Customizing Projector Features Image Sizing Screen Options Other Setup Options 33 34 35 35 37 38 40 41 41 41 42 42 43 43
Where To Get Help 60 Specifications 61 General Lamp Remote Control Dimensions Electrical Environmental Safety Compatible Video Formats ESC/VP21 Command Codes 61 61 61 62 62 62 62 63 65 Notices 67 Important Safety Information FCC Compliance Statement Declaration of Conformity Epson America, Inc.
Contents
Introduction The Epson® PowerLite® Home Cinema 720 projector lets you enjoy theater-quality images in the relaxing environment of your own home.
Projector Parts Horizontal lens shift dial Control panel Vertical lens shift dial Zoom ring Focus ring Ventilation slots Adjustable foot Infrared receiver Lens cover Component PC HDMI port D/SCART port (used mainly in Japan) Trigger out port Infrared receiver Video port S-Video port 8 Introduction AC power inlet Main power switch Control (RS-232C) port Kensington® lock port
Mounting bracket connections (M4x10 screws required) Lamp cover Air filter Projector Control Panel Source button Switches the video input source Menu button Displays the menus Power light Menu navigation buttons Esc button Exits the current menu item Aspect button Changes the picture’s aspect ratio Power button Warning light Keystone correction buttons Correct the shape of a non-rectangular image Select button Selects menu items or opens the line menu Introduction 9
Remote Control Button Map Operation light Lights when you send remote control commands Memory button Recalls custom picture settings Color Mode button Optimizes viewing for different lighting environments Menu button Displays the projector’s menus Aspect button Changes the picture’s aspect ratio Menu navigation buttons Select/Line menu Selects menu items or opens the line menu Source buttons Switch between equipment connected to the projector ESC button Exits the current menu item Gamma button Adju
Optional Accessories Epson provides the following optional accessories for the projector: Product Part number Replacement lamp (ELPLP39) V13H010L39 Air filter replacement (ELPAF09) V13H134A09 Projector mount ELPHB550 Kensington security lock ELPSL01 S-video cable ELPSV01 You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information. Please follow these guidelines as you read through the manual: Warnings: Must be followed carefully to avoid bodily injury. Cautions: Must be observed to avoid damage to your equipment. Notes: Contain important information about your projector.
Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choosing a Location You can install the projector for various viewing setups, as shown below.
Ideally, place the projector at a height where its lens is between the top and bottom of the screen. That way, you can keep the projector level and use the vertical lens shift dial to position the image. This produces the best-looking picture. If you place the projector above or below screen level, you’ll have to tilt it up or down to aim the image at the screen; this distorts the shape of the image, but you can correct its shape using the projector’s Keystone function (see page 25).
The maximum size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may be smaller. Use this table as a rough guide for projector placement: 16:9 aspect ratio 4:3 aspect ratio Maximum diagonal Projection distance image size Projection distance Maximum diagonal image size 3.0 to 6.6 feet 30 in. (26 × 15 in.) 3.7 to 8.0 feet 30 in. (24 × 18 in.) 4.1 to 8.8 feet 40 in. (35 × 20 in.) 5.
Installing the Projector To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the table on page 15 as a guide to locating the projector. Note the following dimensions: ■ Distance from the center of the lens to the mounting bracket holes: 2.32 inches (59 mm), 0.34 inch (8.6 mm) maximum vertical lens shift ■ Distance from the center of the lens to the center of the projector: 4.33 inches (110 mm), 0.30 inch (7.
You will need the optional projector mount designed for the projector. See page 11 for ordering information. Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the screws from loosening and do not use any type of oil or lubricant. These may cause the projector casing to crack and the projector may fall, causing serious injury and serious damage to the projector. Follow the instructions included with the mount to install the projector, which weighs 11.5 pounds.
Connecting the Cables You can connect the projector to any type of video equipment, such as a VCR, DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple® Macintosh® system.
For best results, connect your video equipment to the HDMI (High-Definition Multimedia Interface) port, if possible. If your equipment doesn’t support HDMI, connect it to one of the following ports (highest quality listed first): Component (for component video), S-Video, or Video (for composite video).
■ The Trigger out port outputs a 12-volt DC signal when the projector is turned on. This lets a central control system monitor whether the projector is on or off, and can be used to raise or lower your projection screen automatically when the projector is in use. Connect a 3.5-mm mini jack to the port, as shown. Installing Batteries in the Remote Control The remote control uses 2 AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1.
Turning On the Projector 1. Remove the lens cap. 2. Turn on any connected equipment you plan to use. 3. Turn on the power switch on the back of the projector. Power switch 4. Press the On button on the remote control, or press the Power button on the projector. Turn on the projector Note: To keep children from turning on the projector, you can use the Child Lock (see page 31).
Turning Off the Projector 1. Turn off any equipment connected to the projector. 2. Press the Off button on the remote control, or press the Power button on the projector twice. 3. When the Ppower light stops flashing orange and stays on, turn off the projector’s power switch on the back. It is now safe to unplug the projector, if necessary. Caution: Turn off this product when not in use to prolong the life of the projector. Continuous 24-hour-a-day use may reduce the overall life of the product.
If you press the Source button on the projector, you see a menu of available sources. Press the u or d button to highlight a source and press the Source button Select button. If the Component source is selected, press the Compo. button on the remote control to display the following menu: Press the u or d button to highlight YCbCr or YPbPr, or select Auto so the projector can automatically detect the Component source type. Then press the Select button.
Positioning the Image If the image is not centered on the screen, use the horizontal and vertical lens shift dials to adjust its position. Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position. Horizontal lens shift dial Vertical lens shift dial Note: You can display a test pattern to help adjust the image position. Press the Pattern button on the remote control, then select Display Position.
Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, and color, and quality. For further refinements, see “Making Detailed Adjustments” on page 33. Correcting the Image Shape If the projected image looks like or , use the Keystone function to correct its shape. Note: If the image is shaped like or , the projector has been placed off to the side of the screen and angled toward it.
Focusing and Zooming Sharpen or reduce the focus using the focus ring. Zoom into or out of the picture using the zoom ring. Focus ring Zoom ring Wide Tele Choosing the Aspect Ratio In many cases, video signals are automatically resized to fit on your screen when Auto is selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the Aspect button on the remote control.
If the Auto setting is unavailable, you may want to choose one of these settings: ■ Normal for standard TV broadcasts, computer images, or images with a 4:3 aspect ratio. ■ Zoom for images recorded in 16:9 (wide-screen) format. 4:3 image using Normal setting ■ 16:9 image using Zoom setting Wide if you want to expand a 4:3 image to 16:9 so it fills the whole screen. This stretches only the right and left sides of the image; the central part is unchanged.
Choosing the Color Mode You can change the Color Mode to automatically adjust brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input source—which is useful if you view different types of images from different sources.
Adjusting the Gamma, Color Temperature, and Skin Tones To further customize the color and image quality, you can adjust the Gamma, abstract Color Temperature, and Skin Tone settings using buttons on the remote control. (Not available when you’re projecting sRGB images.) Gamma button S. Tone button ColorTemp. button Note: You can fine-tune these and other color and image quality settings using the projector’s menu system (see page 35).
Adjusting the Gamma Setting You can select from 5 gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. 1. Press the Gamma button. You see the following displayed on the screen: 2. Do one of the following: ■ Select one of the numeric correction values and press the Select button.
Locking the Projector The projector includes two lock settings to prevent the image from being accidentally changed once it’s adjusted, and to keep children from turning on the projector without adult supervision. To access the lock settings, follow these steps: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Settings menu, then open the Operation menu. Menu button 3.
Making Basic Adjustments
Making Detailed Adjustments You can use the projector’s on-screen menus to make detailed adjustments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Using the Menu System You can access the menu system either from the remote control or the buttons on the projector’s control panel.
To display the line menu, press the of the image: Select button. You see a display like this at the bottom Press the u or d button to highlight an option, then press the Press the Menu button to exit the line menu. Select button to select it.
■ Navigation Bar Settings > Display > Navigation Bar Select whether to display the navigation bar, which tells you which buttons to press to choose settings. Navigation bar ■ Menu Color Settings > Display > Menu Color Select a color scheme for displaying the menus. Adjusting the Picture Quality Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 28.
■ Brightness/Contrast Picture > Input Adjustment > Brightness/Contrast Note: If you cannot access the Brightness and Contrast settings, highlight Input Adjustment and press the Select button, then choose Brightness/Contrast in the sub-menu. Adjust the brightness so it’s suitable for your viewing conditions. For example, if you’re projecting in a brightly lit room or onto an especially large screen, you may need to increase the brightness.
■ DVI-Video Level Image > Advanced > DVI-Video Level Note: This setting can be used only when HDMI is selected as the image source (see page 22). If your video equipment has a DVI port and you’ve connected it to the projector using an HDMI/DVI cable, set the level of the projector to match that of the video equipment. When this setting is turned on, the projector disregards the EPSON Super White setting.
Color Settings If the image colors don’t look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode. ■ Color Saturation Picture > Color Saturation Adjusts the color intensity of the image.
■ RGB Picture > Color Adjustment > RGB/RGBCMY > RGB Note: If you cannot access the RGB settings, highlight RGB/RGBCMY (the first item in the menu list) and press the Select button, then choose RGB in the sub-menu. Use the RGB settings to fine-tune the color of the image. You can adjust the offset and gain for each signal color (red, green, and blue). Use Offset to adjust darker shades and Gain for the lightest shades.
Adjustments for Computer Images You can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself. ■ Auto Setup Image > Auto Setup Leave this setting on so that the projector automatically adjusts the tracking, sync, and position of the image.
Selecting Memory Settings and Resetting the Projector Your projector comes with 9 memory locations for installers to save customized settings, designed to provide the best color quality for each of your video inputs. Selecting Memory Settings You can easily recall the memory settings by using the memory button on the remote control: 1. Press the Memory button on the remote control. 2. Use the arrow buttons to select the desired setting, then Select button.
Deleting Saved Memory Settings You can clear all your memory settings at once. 1. Press the Menu button on the remote control. 2. Open the Memory menu, then select Reset Memory. 3. Press the Select button to delete the memory settings. Resetting the Projector If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings.
Customizing Projector Features Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options. Image Sizing Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 26).
Screen Options ■ Message Settings > Display > Message Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes). ■ User’s Logo Settings > User’s Logo Lets you display an image of your choice when the projector is warming up, not receiving a signal, or when you press the Blank button to temporarily stop projection.
Other Setup Options ■ Keystone Settings > Keystone Adjusts the shape of the image, if the left and right sides are not parallel after tilting the projector up or down at the screen (see page 25). ■ Projection Settings > Projection Inverts the image for overhead projection. ■ Direct Power On Settings > Operation> Direct Power On Sets projection to start when the main power switch is turned on, without pressing the On button on the remote control or the Power button on the projector.
■ Sleep Mode Settings > Operation > Sleep Mode Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.) Select 30 min., 10 min., or 5 min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. To turn the projector back on, press the On button on the remote control, or press the Power button on the projector.
Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also need to clean the air filter periodically to prevent overheating. Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case and dry it with a dry cloth. Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case.
4. Turn the projector over. 5. Use a small vacuum cleaner that is designed for computers and other office equipment to clean the filter, as shown. If you don’t have one, gently clean the filter using a very soft brush (such as a clean artist’s paintbrush). If the dirt is difficult to remove or the filter is broken, replace it. Purchase air filter part number V13H134A09 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.
Replacing the Lamp The projection lamp lasts for up to 3000 hours. You can use the Info menu to check how long it’s been in use (see page 53). It’s time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The projector’s warning light flashes red at half-second intervals. ■ The message Replace the lamp appears on the screen when you start projecting. Warning light Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage.
5. Press in the latches securing the lamp cover and lift off the cover. 6. Loosen the two screws securing the lamp (they don’t come all the way out). 7. Grasp the lamp as shown and pull it straight out. Warning: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
8. Gently insert the new lamp and tighten its screws. Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.) 10. Reset the lamp usage timer, as described below. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back, and press the P Power button.
Checking the Projector Status You can use the Info menu to view information about the current display settings and how long the projection lamp has been in use. To access the Info menu: 1. Press the Menu button on the projector or remote control. 2. Use the menu navigation buttons to open the Info menu.
Transporting the Projector Note: Epson shall not be liable for any damages incurred during transportation. The projector contains many glass and precision parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials. Be sure the carrier is capable of transporting fragile equipment and is aware that the projector is fragile.
Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the projector isn’t working correctly, first press the P Power button or the Off button on the remote control, let it cool down, turn off the power switch on the back, and unplug it.
Light state Warning light is red Cause and solution The projector is too hot, which turns off the lamp automatically. Let it cool for five minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. Also, clean or replace the filter if necessary (see page 48). If you are using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure (see page 46).
You’re using a computer and no picture appears on the screen. If you’re using a PC laptop: ■ Press the function key that lets you display on an external monitor. It’s often labeled with an icon such as , but it may also be labeled CRT/LCD. You may have to hold down the Fn key while pressing it. Check your laptop’s manual or online help. On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time.
The picture is upside-down or reversed. Change the Projection setting in the Settings menu (see page 45). Only part of the picture is displayed, or the picture is distorted. ■ Press the Aspect button to select a different aspect ratio (see page 26). ■ If the Aspect is set to Zoom, you may need to use the Zoom Caption option to see the top or bottom section of the screen so that subtitles are visible (see page 43). ■ Check the Output Scaling to make sure it’s adjusted correctly (see page 43).
The picture is blurry. ■ Make sure the Input Signal is set correctly for your video equipment (see page 45). ■ There may be dirt on the lens. Clean the lens as described on page 47. ■ Adjust the focus (see page 26). ■ Make sure the lens is not fogged by condensation. If you’ve just moved the projector from a cold environment, wait a couple of minutes before using it. ■ Adjust the Sharpness setting (see page 37).
Where To Get Help Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.
Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.7 inch (18 mm) wide Lens F=2.0 to 3.17 Resolution (native format) 1280 × 720 pixels, 720p Brightness 1600 ANSI lumens maximum Dynamic contrast ratio 10000:1 Image size 30 to 300 inches Projection distance 3.0 to 66.8 feet (0.93 to 20.35 m) at 16:9 3.7 to 81.7 feet (1.13 to 24.90 m) at 4:3 Zoom ratio 1-2.
Dimensions Height 4.9 inches (124 mm); not including adjustable feet Width 16 inches (406 mm) Depth 12.2 inches (309 mm); not including lens protrusion Weight 11.9 lb. (5.4 g) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 VAC, 2.7 A 200 to 240 VAC, 1.
Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video— which it accepts through the Video, S-Video, and Component ports, respectively. The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital video is accepted by the HDMI port and the Component.
Analog RGB Aspect setting Signal (4:3) Normal Zoom Wide Squeeze Through Squeeze Through VGA* 960 × 720 1280 × 720 1280 × 720 1280 × 720 640 × 480 853 × 480 VESA 960 × 720 1280 × 720 1280 × 720 1280 × 720 640 × 480 853 × 480 SVGA 960 × 720 1280 × 720 1280 × 720 1280 × 720 800 × 600 1066 × 600 XGA 960 × 720 1280 × 720 1280 × 720 1280 × 720 — — SXGA 960 × 720 1280 × 720 1280 × 720 1280 × 720 — — WXGA 1280 × 720 1280 × 720 — 1280 × 720 — — MAC13” MAC16” MAC19” 9
ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support.
Item Aspect ratio 66 Specifications Command Auto ASPECT 00 Normal ASPECT 20 Squeeze ASPECT 21 Zoom ASPECT 22 Through ASPECT 23 Squeeze Through ASPECT 24 Wide ASPECT 25
Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■ Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.
■ The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■ Allow the lamp to cool for one hour before replacing it. ■ Unplug the projector during lightning storms or when not in use for extended periods. ■ Don’t place the projector or remote control on top of heat-producing equipment. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Located at: Epson America, Inc. 3840 Kilroy Airport Way MS 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser of the Epson product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States or Canada, will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase (except that the warranty period is 90 days for projector lamps).
WARRANTY, NEITHER EPSON AMERICA, INC. NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. In Canada, warranties include both warranties and conditions.
Index A Abs. Color Temp.
G L Gain, color, 39 Gamma, 29 to 30, 39 Gamma button, 10 Lamp checking usage timer, 53 life, 61 ordering, 11, 50 replacing, 50 to 52 resetting usage timer, 52 safety instructions, 67 to 68 specifications, 61 Language setting, 34 Lens shift dials, 24 Lens, cleaning, 47 Lights, projector, 55 to 56 Line menu, 10, 34 Lock Kensington, 8, 11 projector buttons, 31 H HDMI, 7, 18, 19 Help, 60 High Altitude Mode, 46 Home Service, 11 I Illumination of buttons, 20 Image adjusting, 25 to 30, 35 to 40 changing aspec
Operation Lock, 31, 46 Output scaling, 43 P Pattern button, 10 Pattern, adjustment, 34 Picture problems, 56 to 59 Pixelworks, 62 Positioning image, 24, 43 Positioning projector, 13 to 15 PrivateLine Support, 60 Problems picture, 56 to 59 remote control, 59 Progressive mode setting, 37 Projection distance, 15, 61 Projector checking status, 53 cleaning, 48 control panel, 9 dimensions, 16, 62 installing, 16 to 17 lights, 55 to 56 locking, 8, 11, 31 menus, 34 to 46 parts, 8 to 9 positioning, 13 to 15 resetting
Trigger port, 20 Turning on and off projector, 21 to 22, 56 U W Warranty, 11, 71 to 72 White level, 36 Wide setting, 27 User’s Logo setting, 44 Z V Video Signal setting, 45 Video, compatible formats, 63 to 64 VP21 codes, 65 76 Index Zoom Caption setting, 27, 43 Zoom ring, 26 Zoom setting, 27
