User`s guide

12 Welcome
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive a Y/C signal, you need a Y/C signal cable. One is
usually provided with your image device, or you can purchase it
from Epson. See page 13.
■ To receive a Component signal from an image device, you need a
D-sub, 15-pin, VGA-to-Component signal cable, which is
available from Epson. See page 13.
■ Some older PowerBooks and Macintosh desktop models may
need a Macintosh image adapter; see your computer dealer. Older
iMac systems may need a special adapter to provide a VGA output
port; see your computer dealer.
■ To receive an audio signal, you need a commercially available
audio adapter cable; see your computer or electronics dealer.
■ To use the PowerLite 260d remote control to change presentation
slides, you need a USB cable; see your computer or electronics
dealer.