User`s guide

Setting Up the Projector 27
Connecting a Component Signal Source
If your image source has Component signal connectors, you can use
them to project a higher quality image. You’ll need a Component
signal cable, which can be purchased from an Epson Authorized
Reseller (part number ELPKC19). To find the reseller nearest you, see
page 94.
Before starting, make sure the projector and your image source are
turned off.
1. Connect the large end of the Component signal cable to the
projector’s
Computer port (PowerLite 260d), or Computer1 or
Computer2 port (PowerLite 280d).
2. Insert the three ends of the Component signal cable into the
R, G,andB ports on your image source.
3. To play sound through the projector, follow the instructions
beginning on page 28.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 31 for instructions.
If more than one device is connected to the projector, select
Computer (PowerLite 260d), or Computer1 or Computer 2
(PowerLite 280d)
as the source by pressing the Source Search
button on the projector or the remote control. See page 33.
Connect Component
signal cable
PowerLite 260d
PowerLite 280d