User`s guide

Projecting 35
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, see below or page 37.
■ If the image is too high or too low, you can reposition it.
See page 38.
■ If the image isn’t rectangular, see page 39.
■ To adjust image brightness, see page 39.
■ If a computer image displays incorrectly, see page 40.
■ To change the color mode for your image and surroundings, see
page 43.
■ To switch the aspect ratio of the image from 4:3 to 16:9 or
vice-versa, see page 46.
You can make many other adjustments to the image—such as
changing the brightness, contrast, and color intensity—using the
projector’s menu system. See Chapter 4 for more information.
Focusing and Zooming Your Image
(PowerLite 260d)
To access the focus ring, slide open the focus ring cover. (When you’re
finished, close the focus ring cover to protect the projector
components.)
Focus ring cover