User`s guide
62 Fine-tuning the Projector
3. Press
Enter. Then use the up and down arrow buttons and the
Enter button to set the following options:
■ Display
Messages:
Lets you turn screen messages on or off.
Display Background: Sets the screen background to Black,
Blue, or Logo when no signal is available.
Startup Screen: Enables or disables display of the startup
screen when the projector is turned on.
A/V Mute: Sets the screen background to Black, Blue, or
Logo when the A/V Mute button is pressed.
■ User’s Logo
Turn on to display the image or logo you have captured
whenever the projector is turned on. See page 66 for more
information.
■ Projection
Front:
Projector is in front of the screen.
Front/Ceiling: Projector is in front of the screen, mounted
upside-down from the ceiling.
Rear: Projector is behind the screen.
Rear/Ceiling: Projector is behind the screen, mounted
upside-down from the ceiling.
To change from
Front to Front/Ceiling or Rear to
Rear/Ceiling, press and hold the A/V Mute button on the
remote control for five seconds.
■ Operation
Direct Power On:
When this feature is enabled, projection
starts as soon as you plug in the power cord or turn on a
power switch controlling the outlet to which the projector is
connected. You don’t have to press the P
Power button to
turn the projector on or off.
Sleep Mode: When Sleep Mode is on, the projector turns
off the lamp if it has not received any input signals for a
period of time (as defined in the Sleep Mode Time setting).
note
Logo settings cannot be
changed if the User’s Logo
Protect feature has been
turned on. See page 68.