User`s guide

Fine-tuning the Projector 67
4. When you see a message asking if you want to use the present
image as a user’s logo, select
Yes and press Enter. A selection box
displays over the image.
5. Use the arrow buttons on the projector or remote control to select
the area of the image you want to use. Once you have selected the
area, press
Enter.
6. When you see the message
Select this image?, choose Yes and
press
Enter. If you want to change the area selected, select No,
press
Enter and repeat steps 5 and 6.
7. When you see this screen, select a zoom rate (display size), and
then press
Enter.
8. When you see the message
Save image as user’s logo?, select
Yes and press Enter. Saving the logo takes a few moments. Do
not use the projector or other sources (computer, image, etc.)
while the logo is being saved.
9. When you see the message
Completed, press Esc.
10. To display the logo as the background screen when the
A/V Mute
button is pressed, select the
Extended menu and press Enter.
11. Select
Display and press Enter.
12. Select
Display Background and press Enter. Then select Logo
and press
Enter.
13. When you’re finished, press
Menu to exit the menus.
note
The default setting for the
Startup Screen option
menu is
ON. If the Startup
Screen
is set to OFF, the
logo will not display at
startup.
If the User’s Logo Protect
f
unction has been set to ON,
the
Display Background
setting cannot be changed.
You need to turn the protect
f
unction off first. See page 68
f
or details.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).