User`s guide

70 Fine-tuning the Projector

If you have forgotten the password, contact Epson with the request

code number that appears in the Password Protect Release screen for

assistance. See page 94.

If you enter an incorrect password 30 times in succession, the

projector remains locked and you must contact Epson to have the

projector serviced.

Disabling the Projector’s Buttons

You can use the Operation Lock function to disable all the projector’s

buttons, or all except the P

Power button.

1. Press the

Menu button.

2. Select the

Settings menu and press Enter.

3. Use the up and down arrow buttons to select

Operation Lock

and press the

Enter button.

4. Select

Full Lock to disable all the buttons, or Partial Lock to

disable all except the

P Power button. Then press Enter.

5. Select

Yes and press Enter to confirm the setting.

6. Press the

Menu button.

Installing Security Locks

You can install two different types of security locks on the projector:

■ You can use the security slot on the side of the projector to install

a Kensington Microsaver Security System. For details, see

www.kensington.com.

■ You can use a wire lock to secure the projector to a room fixture

or heavy furniture, as shown below:

note

To cancel Operation Lock,

ress the projector’s Enter

button for 7 seconds.