User`s guide

Maintenance and Transportation 79
Resetting the Air Filter and Lamp
Timers
You must reset the air filter time setting every time you clean or
replace the air filter to clear any cleaning or replacement warning
messages.
You must reset the lamp timer after replacing the lamp to clear the
Replace the Lamp warning message. Follow these steps:
1. Connect the power cable and turn on the projector.
2. Press the
Menu button on the remote control or projector and
select the
Reset menu. Then press Enter. You see the following:
3. To reset the air filter timer, select
Reset Air Filter Time and press
Enter. You see a confirmation screen.
4. Select
Yes and press Enter.
5. To reset the lamp timer, select
Reset Lamp Hours and press
Enter. You see a confirmation screen.
6. Select
Yes and press Enter.
7. Press
Esc to return to the main menu or the Menu button to exit
the menu system.
note
Do not reset the air filter
time if you have not cleaned
or replaced the air filter. If
you do, the Air Filter Usage
Time will not accurately
reflect the number of hours
the filter has been used.
Do not reset the lamp timer if
you have not replaced the
lamp. If you do, the Lamp
Hours will not accurately
reflect the number of hours
that the lamp has been used.