User`s guide

82 Solving Problems
Using On-Screen Help
If the image doesn’t look right or your audio isn’t working, you can
get help by pressing the
? Help button on the projector or remote
control.
Follow these steps to get help:
1. Press the
? Help button on the remote control or projector. You
see the help menu.
2. Use the up and down arrow buttons on the projector or remote
control to highlight the problem you want to solve. Then press
the
Enter button to view the solution(s).
3. Highlight a solution (if this choice is available). Then press the
Enter button to select the solution.
Press the
Esc button if you need to back up.
If the solution is to adjust one of the settings, use left and right
arrow buttons on the projector or remote control to adjust it.
4. To exit the Help system, press the
? Help button.
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
Lamp light
Power light
Temperature light