EPSON PowerLite 503c/713c Multimedia Projector ® ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
C Contents Welcome .....................................1 Getting the Most from Your Projector . . . . . . . . . . . . . . . . . 2 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 3 Reading This Manual Online . . . . . . . . . . . . . . . . . . . . . 3 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 4 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Unpacking the Projector . . . . . . . . . . . . . . . . . . . . . . . . . .
iv 2 Using the Projector 3 Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . 17 Turning On Your Equipment . . . . . . . . . . . . . . . . . . . . . . . 18 Turning On the Projector . . . . . . . . . . . . . . . . . . . . . . . 18 What To Do If You See a Blank Screen . . . . . . . . . . . . 20 Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Focusing and Zooming Your Image . . . . . . . . . . . . . . . 23 Adjusting the Height of Your Image . . .
4 5 6 Fine-tuning the Projector . . . . . . . . . . . . . . . . . . . 37 Using the Projector’s Menu System . . . . . . . . . . . . . . . . . . . Changing Menu Settings . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repositioning the Image . . . . . . . . . . . . . . . . . . . . . . . . Adjusting Image Appearance . . . . . . . . . . . . . . . . . . . . Adjusting the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Appendix A: Connecting to Additional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Connecting to an External Audio System . . . . . . . . . . . 72 Connecting to a PC Desktop Computer . . . . . . . . . . . . . . . 73 Connecting the Computer Cable . . . . . . . . . . . . . . . . . 74 Connecting the Mouse Cable . . . . . . . . . . . . . . . . . . . . 75 Connecting the Audio Cable . . . . .
W - Welcome The EPSON ® PowerLite® 503c/713c are super-portable projectors that offer up to 1200 ANSI lumens of brightness. From boardrooms to auditoriums, your full-color presentations and videos will be bright and visible even in ordinary room lighting. Images are displayed at a resolution of 1024 × 768 pixels (PowerLite 713c) or 800 × 600 pixels (PowerLite 503c). Three 0.9-inch LCDs provide a 400:1 contrast ratio for incredibly vivid images and clear text.
Getting the Most from Your Projector Depending on your presentation, you can take advantage of any or all of these options: ■ Connecting to a laptop or other computer If you want to connect to a PC laptop or Macintosh PowerBook or iBook, see page 12. To connect to a desktop computer or workstation, see Appendix A. ■ Connecting to video sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other video source to your projector.
Using Your Documentation To connect the projector to your laptop and get your presentation running fast, see the Quick Setup sheet that came in your Owner’s Kit. This book contains all the information you need to set up and use your projector. Please follow these guidelines as you read through it: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment. ■ Notes contain important information about your projector.
■ If you hold your mouse pointer over text and the hand changes to an index finger, you can click to jump to a related topic. For more information, see your Acrobat Reader online guide. Getting More Information Need tips on giving presentations? How about quick steps for setting up your projector? Here’s where you can look for help: ■ www.presentersonline.com Includes a library of articles covering presentation tips, tricks, and technology.
If you still need help after checking this User’s Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner’s Kit. Registration and Warranty Your projector comes with a basic carry-in warranty and an international warranty that let you project with confidence anywhere in the world. For details, see page 86 and the warranty brochure included in your Owner’s Kit.
Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: EPSON PowerLite 503c/713c CD-ROM (not needed to use your projector) Power Freeze A/V Mute R/C ON OFF E-Zoom 3 4 5 1 2 Enter Esc projector batteries power cord remote control PS/2 MOUSE computer cable RCA AV cable USB mouse cable PS/2® mouse cable Save all packaging in case you need to ship the projector.
Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-video signal, you need an S-video cable. (One is usually provided with your video device.) ■ To amplify your computer’s audio through the projector’s sound system, you need a computer audio cable (male-to-male 3.5-mm stereo miniplug cable). See your computer or electronics dealer to obtain this cable.
Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Product number Replacement lamp and air filter ELPLP14 Soft carrying cases: Samsonite® wheeled soft case Slimline soft shoulder bag Notebook/projector soft shoulder bag ATA molded hard shell case ELPKS35 ELPKS31 ELPKS32 ELPKS30 Ceiling mount ELPMB32 Kensington® MicroSaver® security lock ELPSL01 Portable projection screens: 50-inch screen 60-inch Insta-Theatre screen 80-inch Insta-
1 Setting Up the Projector This chapter tells you how to set up the projector and connect it to a laptop computer or video source. If you need to connect the projector to a desktop or workstation computer, see Appendix A.
Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. caution Don’t hold or lift the projector by the lens, or you may damage it. note It’s easier to position the projector when the screen is directly in front of the room. If the screen is placed diagonally in a corner, it’s much more difficult to aim the projector correctly at the screen and get a rectangular image.
If you place the projector below the level of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its rectangular shape, but you can correct the distortion by pressing the Keystone button as described in the next chapter. ideal height If you place the projector level with the bottom of the screen, the image will be rectangular and you won’t have to adjust it.
Connecting to a Laptop Computer note To connect to desktops and other computer systems, see Appendix A. If you have an iBook with an RCA videoout port, follow the instructions for connecting to a video device on page 15. You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks, and hand-held devices.
If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 18 for instructions. Connecting the Cable for Remote Mouse Control note Using the remote control as a wireless mouse lets you click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 36). This gives you more flexibility in delivering your presentation, since you won’t need to stand near your computer.
4. If necessary, configure your laptop to work with an external mouse. If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 18 for instructions. Amplifying Computer Audio Your laptop probably has its own sound system; however, it may not be adequate for your presentation. If you need more volume or better sound quality, you can connect a computer audio cable to take advantage of the projector’s built-in amplifier and speaker.
Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. The projector supports NTSC, PAL, and SECAM, and automatically detects the video format. A standard RCA A/V cable is included with the projector. If your video source also has an S-video jack (as shown with an S-video plug at the right), you can use it to provide a higher quality video image.
Connecting S-Video If your video source has an S-video jack, you can use it to project a higher quality video image. However, you’ll need an S-video cable, which may be included with your video source, or may be purchased. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of an S-video cable into the projector’s S-Video connector. 2. Insert the other end into the S-video output port of your video source. S-Video cable 3.
2 Using the Projector Once you’ve set up the projector, you’re ready to turn it on, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote.
Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you’ve connected to it. You can turn on your computer and video equipment in any order, but if you have both a computer and video source connected, you may have to switch to the desired source as described on page 20.
4. Squeeze the lens cap tabs and remove the lens cap. caution squeeze here Do not use the projector with the lens cap in place. The heat generated by the lens can damage the cap. 5. Press the red Power button on top of the projector. Power button power light The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green. warning Never look into the lens when the lamp is on.
6. Do one of the following: ■ If you’re using a computer, turn it on or restart it. In a few moments, you should see your computer display projected. (Windows® only: If you see a message saying that it has found a plug-and-play monitor, click Cancel.) ■ If you’re projecting a video, press the Source button on top of the projector to switch to your video source, and press the Play button on your DVD player or other device. If a projected image fails to appear, see the next section for help.
If you’re using a Macintosh Laptop: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. click here drag one monitor icon on top of the other 3. Drag one monitor icon on top of the other. If the Arrange icon isn’t available, you may need to select one of the Simulscan resolution settings: 1.
If you’re using a PC laptop: ■ Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s manual or online help for details. On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time.
Focusing and Zooming Your Image Rotate the focus ring to sharpen the image. lens ring tab focus ring Use the tab to rotate the lens ring and reduce or enlarge the image. You can also change the image size by moving the projector closer to or farther away from the screen. You can use the E-Zoom button on the remote control to zoom in on a portion of the image. See page 31 for instructions. Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s feet. 1.
Adjusting the Image Shape If the projected image isn’t rectangular or has a “keystone” shape, do one or more of the following: ■ If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. ■ If your image looks like or , press the + or — side of the Keystone button to correct the shape of the image. After correction, your image will be slightly smaller.
Shutting Down the Projector When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating. 1. If you’re using a computer, shut it down first. 2. To turn off the projector, press the red Power button on the projector or remote control. You see a confirmation message. (If you don’t want to turn it off, press any other button.
26 Using the Projector
3 Using the Remote Control The remote control lets you access your projector’s features from anywhere in the room—up to 30 feet away. You can use it to turn the projector on and off, zoom in on a portion of your image, and highlight your presentation. If you’re using a computer and you’ve connected the mouse cable (as described in Chapter 1 or Appendix A), you can use the remote control as a wireless mouse.
Turning On and Using the Remote Control caution When replacing batteries, take the following precautions: Don’t mix old and new batteries. ■ Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. ■ Before using the remote control, you need to install its batteries and turn it on as described below. Installing Batteries Follow these steps to install or replace the batteries: 1.
Using the Remote Control When using the remote control, stand within 30 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen). ■ Press the button for the function you want to use. See the following pages for instructions. ■ For some functions, you need to use the Enter button like a mouse to navigate on the screen.
Controlling the Picture and Sound You can use the remote control to select your source, adjust the volume, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, or display a picture-in-picture video image. Make sure you have set up your projector and connected any equipment as described in Chapter 1 or Appendix A.
Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound and darken your screen. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen. ■ To turn off the picture, press the A/V Mute button. The screen goes dark. ■ To turn the image back on, press the button again.
Resizing the Image Some computer images need to be resized to display in the projector’s native format—1024 × 768 pixels (PowerLite 713c) or 800 × 600 pixels (PowerLite 503c). If only part of your computer image is displayed, you can correct it with the Resize button. Power Freeze A/V Mute R/C ON OFF E-Zoom 3 4 2 1 5 ■ Press the Resize button on the remote control. The screen image is automatically compressed.
3. When the window is located and sized the way you want, press the Enter button. The menu disappears, and your video plays on the screen. video window 4. When you’re finished viewing the picture-in-picture, press the P in P button again. The video window disappears.
Using the Pointer note You can use the projector’s Effect menu to select a different pointer. See page 43. You can use the pointer tool to place an arrow anywhere on your screen. 1. To activate the pointer tool, press button 1 on the remote control. A yellow arrow appears in the upper left corner of the screen. 2. Use the Enter button to move the arrow wherever you want it. 3. To “paste” the pointer on the screen, press down in the center of the Enter button.
Drawing Horizontal and Vertical Lines You can draw horizontal or vertical lines on the screen to underline or highlight your presentation points. 1. To activate the line or marker tool, press the 3 button on the remote control. A pink marker icon appears in the upper left corner of the screen. This is the “line-drawing” tool. 2. Use the Enter button to move the marker where you want to begin drawing the line. 3. To define the beginning of the line, press down in the center of the Enter button.
You can continue drawing on the screen by repeating steps 2 through 4. 5. To erase your drawing(s), press the 5 button. 6. To cancel the freehand drawing feature, press Esc. Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 30 feet away. This gives you more flexibility, since you won’t need to stand near your computer to change slides, for example.
4 Fine-tuning the Projector You can use the projector’s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use.
Using the Projector’s Menu System The eight projector menus let you adjust and customize the projector features from the remote control: 38 ■ The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, Sharpness, and Contrast. ■ The Audio menu controls the volume level, treble, and bass settings. ■ The Effect menu lets you change the cursor speed and modify the highlighting tools available on the remote control.
Changing Menu Settings Power You can use the buttons on the remote control to access the menus and change settings. Follow these steps: Freeze A/V Mute R/C ON OFF E-Zoom 1. To display the menu screen, press the Menu button on the remote control.
Adjusting the Image The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which image source is selected: computer or video. Repositioning the Image note Follow these steps to fine-tune the image position: If you have repositioned the image, you can use the Auto button on the remote control to restore the default settings. 1. Press the Menu button. You see the main menu. 2. Press Enter to select the Video menu. 3.
Adjusting Image Appearance Follow these steps to adjust the appearance of your image: 1. Press the Menu button. You see the main menu. 2. Press Enter to select the Video menu. 3. Use the Enter button to set one of the following options: ■ Tracking (computer images only) Removes unwanted vertical lines from a computer image by matching the projector’s internal clock to various computer signals.
Adjusting the Sound You can use the Audio menu to adjust the sound volume or treble/bass balance. 1. Press the Menu button. You see the main menu. 2. Use the Enter button to highlight Audio. You see the following: 3. Press Enter to select the Audio menu. 4. Use the Enter button to set the following options: ■ Volume ■ Tone (treble/bass balance) 5. When you’re finished adjusting the sound, press Esc or Menu.
Customizing the Highlighting Tools The highlighting tools let you add pointers and other types of annotations to your image, as described on pages 33 to 36. You can use the Effect menu to customize these tools and set the cursor speed for highlighting. The Reset option lets you return all the highlighting tools to their default settings. 1. Press the Menu button. You see the main menu. 2. Use the Enter button to highlight Effect. You see the Effect menu: 3. Press Enter to select the Effect menu. 4.
5. Use the Enter button to make your selections. 6. When you’re finished customizing the highlighting tools, press Esc or Menu. Your selection(s) are saved. Creating Your Own Startup Screen You can transfer any image on your computer to the projector, and then use it as the screen displayed when the projector is not receiving a signal. You can also set it to be displayed when you press the A/V Mute button, or as a startup screen.
5. Click and drag using the Enter button to select the area of the image you want to use. Once you have selected the entire area, press Enter. 6. When you see the message “Do you use this image?” select Yes and press Enter. If you want to change the area selected, select No, press Enter and repeat steps 4 through 6. You see a message like the one at the right. 7. Use the Enter button on the remote control to select a zoom rate (display size), and then press Enter. 8.
To test your setting, press the A/V Mute button to display your image. Press it again to turn off the image. Customizing Projector Features You can use the Setting menu to enable the projector’s power management system, adjust the image shape, and customize several other features. 1. Press the Menu button. 2. Use the Enter button to highlight Setting. You see the features and their settings on the right side: 3. Press Enter to select the Setting menu. 4.
■ No-Signal Msg. Selects the screen color and message to display when the projector is not receiving a signal. The logo setting displays an image that you have transferred to the projector. See page 44 for instructions on transferring an image to use as the no-signal message. ■ Prompt Turns off the identifying text that appears briefly when you switch from computer input to a video source. ■ A/V Mute Selects the screen color or image to display when you press the A/V Mute button.
Setting Advanced Features You can use the Advanced menu to configure the projector for rear projection or ceiling mounting, and adjust several other features. 1. Press the Menu button. 2. Use the Enter button to highlight Advanced. You see the features and their settings on the right side: 3. Press Enter to select the Advanced menu. 4. Use the Enter button to set the following options: ■ Language Select from nine languages to be used for the projector menus.
■ Ceiling Turn on when the projector is mounted upside-down from the ceiling. 5. When you’re finished, press Esc or Menu. Viewing Lamp Usage and Other Information Use the About menu to view information about the display settings of your computer and the number of hours the lamp has been used. 1. Press the Menu button. You see the main menu. 2. Use the Enter button to select About.
Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Select Reset All and press the Enter button on the remote control to display the confirmation screen. Select Yes to reset all the default settings or No to cancel.
5 Maintaining and Transporting the Projector Y our projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lens, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. extend the lens and remove the cap before cleaning Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord.
Cleaning and Replacing the Air Filter Clean the air filter on top of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filter, follow these steps: 1. Turn off the projector, allow it to cool down, and unplug the power cord. 2. Stand the projector on end to keep dust and dirt from falling inside. 3.
4. If you need to replace the filter, use a small screwdriver to pry it off. 5. To install the new filter, first insert the tab, then press down until it clicks in place. Replacing the Lamp note You can check to see how many hours the lamp has been used. See page 49. The projection lamp typically lasts for about 1000 hours of use. It is time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The lamp warning light is red, flashing red, or flashing orange.
Follow these steps to replace the lamp: 1. Turn off the projector, then unplug the power cord. warning 2. Allow the projector to cool down for at least half an hour (if it has been on). Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 3. Turn the projector upside-down to access the lamp compartment. 4. Use a screwdriver to loosen the retaining screw on the lamp cover. (You can’t remove the screw from the cover.
7. Gently insert the new lamp. 8. Once the lamp is fully inserted, tighten its screws. 9. Replace the lamp cover and tighten its screw securely. (The projector won’t come on if the lamp cover is loose.) Transporting the Projector note EPSON shall not be liable for any damages incurred during transportation. 56 The projector contains many glass and precision parts.
6 Solving Problems This chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or under the cover on the remote control. The following choices are available: ■ Help for the image ■ Help for the sound ■ Language selection Follow these steps to get help: 1. Press the blue ? Help button on the projector or the remote control. You see the help menu. 2.
What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. power light lamp light temperature light If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended below.
The ■ The projector is too hot. Make sure the room temperature does not exceed 104 °F and there is plenty of space around and under the projector for ventilation. ■ The air filter may be clogged. Clean or replace it as described on page 53. The 60 Solving Problems temperature light is red. ■ The projector is overheating, which turns the lamp off automatically. Let the projector cool for a few minutes, then turn it back on.
Refer to the following table for a complete description of the projector’s status lights and their meaning. Status lights Light Status Description orange The projector is in sleep mode. You can unplug it or press the Power button to turn it on. flashing green The projector is warming up. Wait for the image to appear. green The projector is operating normally. flashing orange The projector is cooling down.
Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the power light is green, not flashing, and the lens cap is off. ■ The projector may be in sleep mode. If the power light is orange, press the Power button to turn the projector on. ■ If the power was switched off and then on again, the projector may still be cooling down. Wait until the power light stops flashing and remains orange; then press the Power button again.
If you’re using a PC laptop: ■ Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s manual or online help for details. On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time.
Only part of the computer image is displayed. ■ Press the Resize button on the remote control. ■ Make sure the image Position setting is correct on the Video menu. See page 40 for more information. ■ Make sure your computer’s resolution setting is correct. Ideally, it should be 1024 × 768 to match the projector’s native resolution (800 × 600 on the PowerLite 503c). If this option isn’t available, select one of the other compatible video formats listed on page 92.
The image contains static or noise. ■ If you’re using a computer cable longer than 6 feet, or an extension cable, the image quality may be reduced. ■ Keep your computer and video cables separated from the power cord as much as possible to prevent interference. ■ The video signal may be split between the computer and the projector.
You see vertical stripes or the image still looks blurry after trying the solutions in the previous section. ■ If you’re projecting from a computer and displaying an image that contains a lot of fine detail, you may notice one or more vertical stripes or bands, or some of the characters may look heavy or blurred. Press the Auto button on the remote control. This resets the projector’s tracking and sync settings.
There is no sound. ■ Try turning up the volume. Press the right side of the Volume button on the remote control. ■ If you’re using a VCR or other video source, make sure the volume is not turned all the way down or muted. Also, make sure the cables are connected correctly, as described in Chapter 1. ■ If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted.
Solving Problems with the Remote Control The projector doesn’t respond to remote control commands. Power Freeze A/V Mute R/C ON OFF E-Zoom 3 4 ■ Make sure the remote control is turned on. ■ Make sure you are within 30 feet of the projector, and within range of the projector’s front or back sensor (approximately 30° to the left or right and 15° above or below). ■ The remote control batteries may not be installed correctly or may be low on power. To test the batteries, press the light button.
Where To Get Help EPSON provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Service Access World Wide Web From the Internet, you can reach EPSON’s product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice through e-mail.
Before you call, please have the following information ready: ■ Product name (EPSON PowerLite 503c or EPSON PowerLite 713c) ■ Product serial number (located on the bottom of the projector) ■ Computer configuration ■ Description of the problem You can purchase screens, carrying cases, or other accessories from EPSON at (800) 873-7766 or by visiting the EPSON Store at www.epson.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.
A Appendix A: Connecting to Additional Equipment This appendix explains how to connect the projector to a desktop computer or Macintosh, or a high-end workstation.
Installing the Projector The projector can be installed for three different viewing setups: front projection, ceiling mounting, or rear projection onto a semi-transparent screen. To project from overhead, you’ll need to select Ceiling in the projector’s Advanced menu. To project from the rear, select Rear Proj. See page 48 for more information. If you’re ceiling-mounting the projector and you place it above screen level, you’ll have to tilt it down to position the image on-screen.
Before you start, make sure the projector and speakers or PA system are turned off. 1. Connect the cable’s 3.5-mm stereo miniplug to the projector’s Audio Out jack. 2. Connect the RCA plugs to the speaker or PA system. Insert the cable’s red plug into the Audio R jack, and the white plug into the Audio L jack of the external speaker system. Connecting to a PC Desktop Computer You can connect the projector to any IBM compatible PC.
Connecting the Computer Cable 1. Disconnect the monitor cable from the video port on the back of the computer. 2. Connect one end of the computer cable to the projector’s Computer port. 3. Connect the other end of the computer cable to the computer’s video port. 4. Tighten the screws on the connectors.
Connecting the Mouse Cable To use the remote control as a mouse, follow the steps below. You’ll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect one end of the appropriate mouse cable to the projector’s Mouse/Com port or the USB port, as shown. connecting PS/2 mouse cable connecting USB mouse cable 2. Disconnect your mouse from the port on the back of your computer and replace it with the other end of the cable.
Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you can use a computer audio cable. The required cable (3.5-mm stereo miniplug cable) is available from computer or electronics dealers. 1. Connect one end of the audio cable to the Audio In jack on the projector. Audio In jack audio cable 2. Connect the other end of the audio cable to the speaker or audio out port on the computer’s sound card.
Connecting to a Desktop Macintosh You can connect the projector to any desktop Macintosh. This section includes instructions for the following: ■ Connecting the computer video cable ■ Connecting the mouse cable (if you want to use your remote control as a mouse) ■ Connecting an optional audio cable (if you’ll be projecting with audio) When you connect the projector to a desktop Macintosh, you cannot view your display on the Macintosh monitor.
If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8). To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions. Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh. 4. Tighten the screws on the connectors.
Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you can use a computer audio cable. The required cable (3.5-mm stereo miniplug cable) is available from computer or electronics dealers. 1. Connect one end of the audio cable to the Audio In port on the projector. 2. Connect the other end of the audio cable to the speaker or audio-out jack on the Macintosh.
80 Appendix A: Connecting to Additional Equipment
B Appendix B: Notices This appendix includes safety instructions and other important information about your EPSON PowerLite 503c/713c. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use attachments only as recommended. ■ Use the type of power source indicated on the projector.
82 Appendix B: Notices ■ Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug. ■ Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. ■ Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating.
■ Do not store the projector outside of the required temperature range (14 to 140 °F) or in direct sunlight for long periods of time. Doing so may cause damage to the case. ■ Do not use the projector with the lens cap in place. The heat generated by the lens may damage the cap. ■ The liquid crystal display panel contains more than 99.99% active pixels. However, 0.01% of the pixels may be missing or constantly illuminated.
Declaration of Conformity According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc.
FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC.
88 Appendix B: Notices
C Appendix C: Technical Specifications General Type of display Poly-silicon Thin Film Transistor (TFT) Size of LCD panels Diagonal: 0.9 inches (22.9 mm) Lens F=2.0 to 2.2, f=35 to 42 mm Resolution 713c: 1024 × 768 pixels (native format) 503c: 800 × 600 pixels (native format) Color reproduction 24 bit, 16.7 million colors Brightness 713c: 1200 lumens (ANSI) 503c: 1100 lumens (ANSI) Contrast ratio 400:1 Image size 26 to 300 inches Projection distance 3.6 to 45.5 feet (1.1 to 13.
Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 150 W Lamp life About 1000 hours Part number ELPLP14 Remote Control Range 32.8 feet (10 meters) Batteries Alkaline AA (2) Mouse Compatibility Supports PS/2, USB, ADB Dimensions Height 2.8 to 3.4 inches (72 to 87 mm) Width 8.4 inches (213 mm) Depth 10.5 inches (267 mm) Weight 5.8 lb (2.6 kg) Electrical 90 Rated frequency 50/60 Hz Power supply 100 to 120 VAC, 1.9 A 200 to 240 VAC, 1.
Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States FCC Part 15B Class B UL1950 Rev. 3 Canada DOC ICES003 Class B CSA C22.2 No. 950 Rev.
Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector; see the following table for compatible formats. As noted below, some images are automatically resized to display in one of the projector’s “native” formats (such as XGA).
Mode Refresh Rate (Hz) Resolution SXGA3—43i 43.436 1280 × 10242 SXGA3—60 60.02 1280 × 10242 SXGA3—75 75.025 1280 × 10242 SXGA3—85 85.024 1280 × 10242 UXGA60 60 1600 × 12003 MAC II 13 66.67 640 × 480 MAC16 75.087 832 × 6241 MAC19—60 59.28 1024 × 7681 MAC19 74.93 1024 × 7681 MAC21 75.062 1152 × 8702 NTSC 60 640 × 4802 PAL 50 720 × 5402 SECAM 50 720 × 5402 1 The image is resized so that it displays using one of the projector’s native formats (PowerLite 503c only).
Computer Video Port Pin Assignments The Computer port is a female video RGB, 15-pin micro-D-style connector. Here are its pin assignments: 94 Pin no.
Index A C A/V Mute button, 31, 45 A/V Mute setting, 47 About menu, 38, 49 Accessories, 8, 70 Adapters, Macintosh, 77 to 78 Adobe Acrobat Reader, 3 to 4 Advanced menu, 38, 48 to 49 Air filter, cleaning and replacing, 53 to 54 Anti-theft device, 8, 11 Aspect ratio, 89 Audio adjusting tone, 42 adjusting volume, 30, 42 connecting desktop, 76, 79 connecting laptop, 14 connecting video device, 15 to 16 menu, 38, 42 outputting to external sound system, 72 to 73 problems, troubleshooting, 67 turning off (using A/
E Effect menu, 38, 43 to 44 Electrical specifications, 90 Enter button, 29 Environmental specifications, 91 EPSON accessories, 8, 70 PrivateLine Support, 5, 69 technical support, 4, 69 to 70 Esc button, 36 External speakers, connecting to, 72 to 73 E-Zoom button, 31 F FCC compliance statement, 85 Filter See Air filter Focusing, 23 Foot release levers, 23 Freehand line tool customizing, 43 to 44 using, 35 to 36 Freeze button, 31 G Gamma setting, 41 H Height of image, adjusting, 23 Help, 4 to 5, 69 to 70 H
M Macintosh, connecting to, 77 to 79 Manuals, 3 to 5 Marker tool customizing, 43 to 44 using, 35 Menus About, 38, 49 Advanced, 38, 48 to 49 Audio, 38, 42 changing settings, 38 to 39 Effect, 38, 43 to 44 Reset All, 38, 50 Setting, 38, 46 to 47 User’s Logo, 38, 44 to 45 using, 38 to 39 Video, 38, 40 to 41 Monitor adapter, Macintosh, 77 to 78 N No-Signal Msg setting, 45, 47 O Options for projector, 8 P P in P (picture in picture) button, 32 to 33 Picture See Image Picture-in-picture video source, selecting,
Remote control light button, 28 numbered buttons, 33 problems, 68, 83 specifications, 90 troubleshooting, 68, 83 turning on, 28 using, 27 to 36 wireless mouse, using as, 36 Replacing lamp, 54 to 56 Reset All menu, 38, 50 Resetting menu options, 39, 50 Resize button, 32 Resizing image, 32 Resolution, 1, 89 S Safety instructions, 81 to 83 Screen image See Image Screen, distance from projector, 10 Screens, portable, 8 Setting menu, 38, 46 to 47 Sharpness setting, 41 Sleep mode, 25, 47 Software, 4 Sound See Au
Video sources, connecting to, 15 to 16 Volume button, 30 setting, 42 W Warning lights, 59 to 62 Warranty, 5, 86 to 87 Workstations, connecting projector to, 79 Z Zoom ratio, 89 Zooming image, 23, 31 Index 99