Administrator's Guide

Setting Up the Projector

Connecting the Mouse and Serial Cables

You may need to connect the mouse or serial cable in the following

situations:

■

If you want to use the remote control in place of your computer’s

mouse, you need to connect the mouse cable as described below.

(When presenting with EasyMP.net instead of from a computer,

you don’t need to use the cable.)

■

If you want to use the EMP Link V software on a Macintosh, or

on a Windows PC that’s not connected to the network, you need

to connect the serial cable as described below.

1. Connect the round end of the main cable to the projector’s

Mouse/Com

port, as shown.

2. To use the remote control as a wireless mouse, choose the correct

mouse cable for your system:

■

PS/2 mouse

■

PC serial mouse

■

USB mouse

■

Mac mouse

note

You cannot use the EMP

Link V software on a

acintosh that doesn’t have

a serial port.

main cable

PC serial cable

mouse cable

Mouse/Com port