Administrator's Guide

28
Setting Up the Projector
Connecting Composite (RCA) Video
Before starting, make sure the projector and your video device are
turned off.
1. Connect the yellow RCA plug on one end of the RCA video cable
to the projector’s
Video
port. Connect the other end of the cable
to the video-out port of your video source.
2. To use the projector’s built-in speaker system, connect the RCA
audio cable to the left and right Audio ports of the projector
(insert the white plug into the
L
port and the red plug into the
R
port). Connect the plugs at the other end of the cable to the audio
output ports of the video source.
RCA audio cable
RCA video cable