Administrator's Guide

Setting up EasyMP.net

13. If necessary, click the

Sharing

tab. You see a screen similar to the

following:

14. Select

Shared As

, then type a name for the shared drive or folder.

(You can use the name suggested by Windows or type a new one.)

Be sure to note down the name, because you’ll need it later to

finish the setup.

15. Select the level of security desired (read-only or full access) and

enter a password, if needed, according to the instructions for your

operating system. The projector will prompt the user for the

password before connecting to the drive or folder.

16. Click

to close the dialog box.

note

If the user won’t have a

keyboard available to type in

the password when using the

rojector, you may wish to

create the password from

digits 1 through 5. That way,

it can be entered using the

numbered buttons on the

remote control. (The software

keyboard can also be used, if

necessary; see page 50.)