Administrator's Guide

Setting up EasyMP.net

Identifying the PC to the Projector

Follow these steps to enable the projector to recognize any shared

systems on the network:

1. Turn on the projector, as described on page 36. Wait until you

see the EasyMP.net main menu screen.

If you don’t see the main menu, press the

Comp/Easy-MP

button on the projector’s control panel. (You may need to press it

more than once.) You can also press the

EasyMP.net

button on

the remote control.

2. Connect an interface device, such as a USB mouse or tablet, to the

projector as shown. If you have a USB keyboard, you may wish

connect it as well.

Esc

Comp1

P in P Preset

Video

Help

- Volume +

Capture

Auto

APPs

Resize

Comp2/YCbCr

press to

start

EasyMP

note

If you don’t have a USB

mouse, you can use the

projector’s remote control to

point and click. If you don’t

have a USB keyboard, you

can use the software

keyboard. See page 50 for

instructions.