Administrator's Guide

72
Fine-tuning the Projector
4. Select the number to which you want to assign the current
settings.
5. Press
Enter
. When you see the “Overwrite?” prompt, select
Yes
and press
Enter
.
6. Press
Esc
to exit the menu system.
When you want to use a saved setting, press the
Preset
button on the
remote control. You see the setting number displayed in yellow at the
top right of the screen.
To select another number, press the
Preset
button again until the
setting number you want is displayed. The projector resets itself
according to the selected setting.
Adjusting the Sound
You can use the Audio menu to adjust the volume, treble and bass,
and the perceived width and depth of the sound.
1. Press the
Menu
button. You see the menu screen.
2. Highlight the
Audio
menu, then press
Enter
.
Volume
Treble
Bass
SRS SPACE
SRS CENTER
Reset
Execute
:
:
:
:
:
15
0
0
0
0
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter